পার্টনার প্রোগ্রাম

1. How participation starts

Activation in five steps

1. Connect the wallet to the official Atlas System Personal Dashboard.
2. Create the first qualifying Smart Cycle with a Support Amount of 10 USDT or more.
3. Open Partner Program → My Team.
4. Copy My Referral Link and share it with a participant you want to invite.
5. After the invited participant connects through the link, their wallet becomes part of your unified Atlas System Partner Structure.

No separate Partner Program registration form is required. Activation and calculations are performed automatically under the program rules.

What appears in My Team

Field	What it means
Partner Status	Current status and Structure Reward percentage
My Referral Link	Personal link used to invite new participants
My Referrer (Wallet Address)	Wallet whose referral link was used when joining
Referrer Status	Current Partner Status of the referrer

If My Referral Link shows Not Available, first check that the connected wallet has a qualifying Smart Cycle and that its blockchain transaction has been confirmed.

One structure across the Atlas ecosystem

An invited participant is permanently linked to the unified Atlas System Partner Structure. The same structure can be used by new ecosystem products and programs as they become available.

This means:

• a team does not need to be rebuilt for each new Atlas product;
• partner relationships remain connected to the original referral structure;
• the current Level Compression Model applies its own qualification and reward rules;
• future partner models may use the same base relationship while keeping their calculations, volumes and rewards separate;
• the same volume is not automatically counted in several programs at once.

A referral connection does not create an automatic right to a reward. A referral link connects wallets within the partner structure, while each active model checks its own qualification rules. It does not give the inviter control over another participant's wallet or funds.

2. Partner Program interface map

The Partner Program section contains four tabs. Each tab answers a different question.

Partner Wallet — what can be transferred?

Use Partner Wallet to check:

• Account Balance;
• Total Accrued;
• Rewards Received;
• Withdrawal History;
• Tx Hash for an on-chain transfer.

Accrual History — where did the reward come from?

Use Accrual History to identify:

• Accrual Date;
• Bonus type;
• Accrued Reward Amount.

An accrual and a blockchain transfer are different stages. Check Accrual History first, then Partner Wallet and Withdrawal History.

My Team — what is needed for the next status?

Use My Team to review:

• referral and referrer information;
• current Partner Status;
• Current / Required / Remaining volumes;
• Status Requirements;
• Structure Lines;
• Search by Wallet Address;
• leaders and activity inside the structure.

Statistics — how is the structure developing?

Use পরিসংখ্যান to compare:

• Day / Week / Month / Year / All Time;
• New Registrations and Active Partners;
• Lockup Flow and Daily Flow activity;
• Entire Structure, First Line, Lines 2–10 and Line 11+;
• Most Active Lines.

Quick route by task

The Personal Dashboard shows the result of the calculation. The following sections explain the status, compression, flow-specific and Matching Reward rules behind it.

3. Partner Status: how qualification works

Partner Status determines two parameters: the participant's Structure Reward rate and, from Master 1 onward, the Matching Reward rate. The system checks the qualification conditions automatically.

Three indicators are checked

To receive a status, all requirements shown for that level must be met. If a requirement is marked Not required, it does not affect that status.

All 19 Partner Statuses

Status	Personal Active Cycle Volume	First-Line Active Cycle Volume	Partner Structure Active Cycle Volume	Structure Reward	Matching Reward
Start	10	Not required	Not required	15%	—
Builder 1	50	100	Not required	18%	—
Builder 2	100	300	1,000	21%	—
Builder 3	200	700	2,000	24%	—
Builder 4	300	1,200	4,000	27%	—
Builder 5	500	2,000	7,000	30%	—
Builder 6	700	3,000	12,000	33%	—
Builder 7	1,000	4,500	18,000	36%	—
Master 1	1,500	7,000	28,000	38%	5%
Master 2	2,000	10,000	40,000	40%	7%
Master 3	3,000	17,000	70,000	42%	9%
Master 4	4,000	25,000	120,000	44%	11%
Master 5	5,000	35,000	200,000	46%	13%
Master 6	6,000	45,000	300,000	48%	15%
Master 7	7,000	60,000	450,000	50%	17%
Strategist	8,000	80,000	600,000	52.5%	19%
Ambassador	10,000	100,000	800,000	55%	21%
Director	12,000	120,000	1,100,000	57.5%	23%
Executive	15,000	150,000	1,500,000	60%	25%

All amounts in the table are shown in USDT-equivalent units used by the Atlas interface.

How to read progress in My Team

• Current — the volume already counted toward the selected requirement;
• Required — the target for the next status;
• Remaining — the amount still needed to satisfy that requirement.

Check every requirement card, not only the total Partner Structure Active Cycle Volume. A large structure alone does not replace the Personal Active Cycle Volume or First-Line Active Cycle Volume requirement.

A status rate is a qualification parameter used by the reward algorithm. It is not a promised percentage return on a participant's Smart Cycle.

4. Qualification volume, Delta and depth

Several similar-looking values serve different purposes. Keeping them separate makes the Partner Program much easier to understand.

The short version

The original Support Amount and the generated Delta are not the same value. Partner Rewards are calculated from Delta, not from the full amount placed into a Smart Cycle.

Actual and Weighted Partner Structure Volume

• Actual Partner Structure Volume shows the structure's qualifying volume before depth coefficients are applied.
• Weighted Partner Structure Volume shows the volume after the coefficients are applied and is used for status qualification where the rules require it.

Example of weighted volume

Suppose the structure has 1,000 USDT of qualifying volume on each of three depth groups:

This example explains status-volume weighting only. It does not calculate a Partner Reward.

Where to check the numbers

• open Partner Program → My Team for qualification volumes and next-status progress;
• open পরিসংখ্যান to compare structure activity by depth and period;
• open Accrual History to see an actual calculated Partner Reward;
• use Partner Wallet → Withdrawal History to verify a completed transfer.

Do not use cycle volume, Partner Structure Volume and Delta as interchangeable terms. Cycle volume is used for status qualification; Delta is the reward calculation base.

5. Compression: who receives which part of the reward

Compression distributes the available Partner Reward according to the percentage qualifications of active partners in the branch. An upline participant receives the difference between their status rate and the rate already realised by a qualified partner below.

The rule in three situations

The position of a wallet at the top of a branch does not guarantee a reward. Qualification and active status determine how the available percentage is distributed.

Official example: Builder 4 above Builder 3

The lower structure generates 1,000 USDT of Delta.

Participant	Partner Status	Rate	Calculation	Partner Reward
Lower qualified partner	Builder 3	24%	24% × 1,000	240 USDT
Upline partner	Builder 4	27%	(27% − 24%) × 1,000	30 USDT
Total distributed by status rates		27%		270 USDT

If there is no Builder 3 between the source and Builder 4

Builder 4 can realise the full eligible rate:

27% × 1,000 USDT = 270 USDT

If the lower partner reaches the same or a higher rate

If the lower partner reaches Builder 4 (27%) or a higher status, the upline Builder 4 no longer has a positive percentage difference. The structure behind that partner is compressed for the upline participant.

Compression does not remove a participant from the Partner Structure. It changes how the Partner Reward is distributed for the relevant Delta source.

6. Partner Rewards from Lockup Flow

For a qualifying Lockup Flow Smart Cycle, the inviter receives a Partner Reward calculated as a percentage of the invited participant's Delta.

When and how it is calculated

1. The invited participant creates a Lockup Flow Smart Cycle.
2. The system records the inviter's Partner Status at that moment.
3. The applicable status and compression rules are applied to the cycle's Delta.
4. The Partner Reward is accrued once when the Smart Cycle is created; the inviter does not wait for the invited participant to Claim.

Automatic transfer rule

• if an accrued Lockup Flow Partner Reward is more than 10 USDT, it is automatically credited to the inviter's wallet after formation;
• an amount below 10 USDT is credited to the Partner Balance;
• when the accumulated Partner Balance reaches 10 USDT, 10 USDT is automatically transferred to the inviter's wallet.

Check the sequence in Accrual History → Partner Wallet → Withdrawal History → Tx Hash.

A Partner Reward accrual and the invited participant's Claim are separate events. The accrual does not mean that the inviter controls or initiates the invited participant's Claim.

7. Partner Rewards and qualification from Daily Flow

For Daily Flow, the inviter's applicable Partner Reward percentage is calculated from the invited participant's Delta. The percentage is determined by the inviter's Partner Status when the invited participant creates the Smart Cycle.

For Daily Flow, 20% of the Partner Reward is credited when the cycle is created, and the remaining 80% is paid in equal parts over the 200-day cycle. Use Accrual History and Partner Wallet to verify actual accruals and transfers.

How Daily Flow is counted for status qualification

Daily Flow contributes to the structure's qualifying volume with a coefficient of 0.5. Short-term Smart Cycle plans are counted with a coefficient of 1.0.

Formula: qualifying volume = short cycles × 1.0 + Daily Flow × 0.5.

The coefficient affects status qualification volume, not the participant's 1.1% / 1.3% daily assistance calculation and not the Partner Reward percentage itself.

Atlas explains the coefficient as a way to prioritise regular short-cycle activity, prevent one large long-term cycle from disproportionately accelerating status growth, and keep qualification conditions balanced across partner teams.

Hybrid visual: use the official Daily Flow qualification graphics showing 100% short cycles and 50% Daily Flow with the × 0.5 formula.

Daily Flow still contributes to qualification. The coefficient changes how much of its cycle volume is counted; it does not remove Daily Flow from the Partner Program.

8. Matching Reward

Matching Reward is an additional status benefit available from Master 1 onward. It allows a participant to receive the applicable Matching Reward percentage from the Partner Rewards of personally invited leaders.

Qualification condition

Matching Reward is awarded only when the personally invited participant:

• reaches the same Partner Status as the inviter; or
• reaches a higher Partner Status than the inviter.

If the personally invited participant's status is lower, Matching Reward is not awarded from that participant's Partner Rewards.

Matching Reward rates

How to read the rule

Matching Reward is calculated from the Partner Reward received by the personally invited qualified participant. It is not calculated directly from that participant's Support Amount or total structure turnover.

Master 3 inviterpersonally invited→Master 3+Matching active

Master 3 inviterpersonally invited→Master 2Not active

Matching Reward concerns personally invited participants only. The unlimited-depth Structure Reward and the personally invited leader's Matching Reward are different mechanisms.

9. How to verify an accrual and a transfer

Use the dashboard in chronological order. Each screen answers a different question.

Step 1 — find the calculation

Open Partner Program → Accrual History and check:

• Accrual Date — when the reward was recorded;
• Bonus — which Partner Reward mechanism was applied;
• Accrued Reward Amount — the amount added by the calculation.

An entry in Accrual History confirms an accrual. It does not by itself confirm that USDT has already reached the connected wallet.

Step 2 — check the partner balance

Open Partner Wallet and compare:

The Partner Wallet balance is an internal dashboard value. It is not the same as the USDT balance displayed by MetaMask.

Step 3 — verify the blockchain transfer

Open Withdrawal History, find the relevant transfer and select its Tx Hash. BscScan should show:

• transaction status;
• date and time;
• sender and recipient addresses;
• token and amount;
• network fee and block confirmations.

Before comparing addresses, verify that the same wallet is connected in the Atlas dashboard and MetaMask.

If the numbers do not match immediately

1. Check whether a Lockup Flow accrual is still below the automatic-transfer threshold.
2. Check whether the record is an accrual rather than a completed withdrawal.
3. Confirm the connected wallet address and BNB Smart Chain network.
4. Open the Tx Hash instead of relying only on the dashboard total.
5. If no Tx Hash exists, save the wallet address, Smart Cycle ID, date and screenshot before contacting support.

10. My Team and Statistics: managing the structure

My Team — qualification and people

Use My Team when you need to:

• copy the referral link;
• confirm the referrer;
• see the current Partner Status and rate;
• compare Current / Required / Remaining values;
• inspect Structure Lines;
• search for a wallet address;
• identify leaders within the structure.

Statistics — activity and dynamics

Use পরিসংখ্যান to answer a different set of questions:

• how many new registrations and active partners appeared;
• whether activity came from Lockup Flow or Daily Flow;
• which period changed: Day, Week, Month, Year or All Time;
• where the activity occurred: Entire Structure, First Line, Lines 2–10 or Line 11+;
• which lines are the most active.

Statistics helps explain development of the structure, but it does not replace Accrual History. Activity can exist without producing a Partner Reward for a particular wallet because status, compression and qualification rules still apply.

11. Three worked examples

Example A — Start with no qualified partner between

Calculation: 15% × 100 = 15 USDT.

The result is recorded in Accrual History according to the applicable flow and accrual rules. This example assumes that no other qualification or compression condition changes the percentage.

Example B — Builder 4 above Builder 3

Input	Value
Upline status	Builder 4 — 27%
Lower qualified status	Builder 3 — 24%
Delta	1,000 USDT

• Builder 3: 24% × 1,000 = 240 USDT;
• Builder 4: (27% − 24%) × 1,000 = 30 USDT.

Example C — Matching Reward for a personally invited Master

Assume a participant has Master 1 status with a 5% Matching Reward rate. Their personally invited participant also reaches Master 1 or higher and receives a Partner Reward of 100 USDT.

Calculation: 5% × 100 = 5 USDT Matching Reward.

The 5% is applied to the personally invited leader's Partner Reward, not to their Support Amount and not to their total structure turnover.

Master 1 inviter · 5%→Partner Reward 100→Matching Reward 5

All three examples isolate one rule for learning purposes. Actual dashboard results can combine compression, flow-specific rules, qualification and applicable fees.

12. Why a Partner Reward may be missing

Information to prepare for support

• connected wallet address;
• referrer or participant wallet address, if relevant;
• Smart Cycle ID and flow type;
• approximate date and time;
• screenshot of the relevant dashboard tab;
• Tx Hash, if one exists;
• short description of the expected and displayed result.

Never send a seed phrase, private key or wallet password to support.

13. Final checklist and risk warning

Before sharing the referral link

• the official Atlas dashboard is open;
• the intended wallet is connected on BNB Smart Chain;
• a qualifying Smart Cycle is active;
• My Referral Link is available;
• the invited participant understands that wallet actions remain under their own control.

Before interpreting a reward

• identify whether it is Structure Reward or Matching Reward;
• identify whether the source is Lockup Flow or Daily Flow;
• use Delta as the reward base, not Support Amount;
• account for status-rate differences and compression;
• separate Actual and Weighted Partner Structure Volume;
• verify accrual, dashboard balance and blockchain transfer as separate stages.

Risk warning

Participation is voluntary. Delta, Partner Rewards and the return of a Support Amount are not guaranteed. Claims depend on sufficient smart-contract liquidity. Status tables, screenshots and numerical examples explain the current mechanics; they are not a promise of income or future results.

Related instructions

• Personal Dashboard
• Smart Cycle
• Contracts & BscScan
• নিরাপত্তা
• শব্দকোষ
• সমস্যা সমাধান