Programme partenaire

1. Comment la participation commence

Activation en cinq étapes

1. Connectez le portefeuille au tableau de bord personnel officiel du système Atlas.
2. Créer le premier Smart Cycle éligible avec un montant de soutien de 10 USDT ou plus.
3. Ouvrir Programme Partenaires → Mon équipe.
4. Copier Mon lien de parrainage et partagez-le avec un participant que vous souhaitez inviter.
5. Une fois que le participant invité se connecte via le lien, son portefeuille est intégré à votre structure partenaire unifiée du système Atlas.

Aucun formulaire d'inscription au Programme Partenaires distinct n'est requis. L'activation et les calculs sont effectués automatiquement conformément aux règles du programme.

Ce qui apparaît dans Mon équipe

Champ	Qu'est-ce que cela signifie
Statut de partenaire	Statut actuel et pourcentage de la prime de structure
Mon lien de parrainage	Lien personnel utilisé pour inviter de nouveaux participants
Mon parrain (Adresse du portefeuille)	Portefeuille dont le lien de parrainage a été utilisé lors de l'inscription
Statut du parrain	Statut actuel de partenaire du parrain

Si Mon lien de parrainage spectacles Non disponible, vérifiez d'abord que le portefeuille connecté possède un Smart Cycle éligible et que sa transaction sur la blockchain a été confirmée.

Une structure unique à travers l'écosystème Atlas

Un participant invité est lié de manière permanente à la structure unifiée des partenaires du système Atlas. La même structure pourra être utilisée par les nouveaux produits et programmes de l'écosystème au fur et à mesure de leur disponibilité.

Cela signifie :

• une équipe n'a pas besoin d'être reconstruite pour chaque nouveau produit Atlas;
• les relations de partenariat restent liées à la structure de recommandation d'origine ;
• le Modèle de Compression de Niveau actuel applique ses propres règles de qualification et de récompense ;
• les futurs modèles de partenaires pourront utiliser la même relation de base tout en gardant leurs calculs, volumes et récompenses séparés ;
• Le même volume n'est pas automatiquement comptabilisé dans plusieurs programmes à la fois.

Une connexion parrainée ne crée pas de droit automatique à une récompense. Un lien de parrainage connecte les portefeuilles au sein de la structure partenaire, tandis que chaque modèle actif vérifie ses propres règles de qualification. Il ne donne pas à l'parrain le contrôle sur le portefeuille ou les fonds d'un autre participant.

2. Plan de l'interface du programme partenaire

La section du programme Partenaire contient quatre onglets. Chaque onglet répond à une question différente.

Portefeuille Partenaire — qu'est-ce qui peut être transféré ?

Utiliser Portefeuille partenaire vérifier

• Solde du compte;
• Total cumulé;
• Récompenses reçues ;
• Historique des retraits;
• Hachage de transaction pour un transfert sur chaîne.

Historique des cumuls — d'où vient la récompense ?

Utiliser Historique des cumuls identifier

• Date de cumul;
• Type de bonus ;
• Montant de récompense cumulé.

Un cumul et un transfert sur la blockchain sont des étapes différentes. Vérifiez d'abord l'historique des cumuls, puis le portefeuille partenaire et l'historique des retraits.

Mon équipe — que faut-il pour le prochain point de situation ?

Utiliser Mon équipe à réviser :

• informations sur la recommandation et le parrain;
• Statut de partenaire actuel ;
• Volumes actuels / requis / restants ;
• Exigences de statut ;
• Lignes de structure;
• Rechercher par adresse de portefeuille;
• dirigeants et activité à l'intérieur de la structure.

Statistiques — comment évolue la structure ?

Utiliser Statistiques comparer

• Jour / Semaine / Mois / Année / Tout le temps;
• Nouvelles inscriptions et partenaires actifs;
• Flux de blocage et activité du flux quotidien ;
• Structure entière, première ligne, lignes 2 à 10 et ligne 11 et plus ;
• Lignes les plus actives.

Accès rapide par tâche

Le tableau de bord personnel affiche le résultat du calcul. Les sections suivantes expliquent le statut, la compression et les règles de correspondance et spécifiques au flux qui le régissent.

3. Statut de partenaire : fonctionnement de la qualification

Le statut de partenaire détermine deux paramètres : celui du participant Taux de récompense de structure et, à partir du Master 1, le Taux de récompense correspondant. Le système vérifie automatiquement les conditions de qualification.

Trois indicateurs sont vérifiés

Pour obtenir un statut, toutes les conditions affichées pour ce niveau doivent être remplies. Si une condition est marquée Non requis, cela n'affecte pas ce statut.

Tous les 19 statuts de partenaire

Statut	Volume de Cycle Actif Personnel	Volume de cycle actif de première ligne	Volume du cycle actif de la structure des partenaires	Récompense structurelle	Récompense de correspondance
Commencer	10	Non requis	Non requis	15%	—
Constructeur 1	50	100	Non requis	18%	—
Constructeur 2	100	300	1,000	21%	—
Constructeur 3	200	700	2,000	24%	—
Constructeur 4	300	1,200	4,000	27%	—
Constructeur 5	500	2,000	7,000	30%	—
Constructeur 6	700	3,000	12,000	33%	—
Constructeur 7	1,000	4,500	18,000	36%	—
Master 1	1,500	7,000	28,000	38%	5%
Master 2	2,000	10,000	40,000	40%	7%
Master 3	3,000	17,000	70,000	42%	9%
Maître 4	4,000	25,000	120,000	44%	11%
Master 5	5,000	35,000	200,000	46%	13%
Master 6	6,000	45,000	300,000	48%	15%
Maître 7	7,000	60,000	450,000	50%	17%
Stratège	8,000	80,000	600,000	52.5%	19%
Ambassadeur	10,000	100,000	800,000	55%	21%
Directeur	12,000	120,000	1,100,000	57.5%	23%
Cadre	15,000	150,000	1,500,000	60%	25%

Tous les montants du tableau sont exprimés en unités équivalentes en USDT utilisées par l'interface Atlas.

Comment lire la progression dans Mon Équipe

• Actuel — le volume déjà pris en compte pour l'exigence sélectionnée ;
• Required — the target for the next status;
• Remaining — the amount still needed to satisfy that requirement.

Check every requirement card, not only the total Partner Structure Active Cycle Volume. A large structure alone does not replace the Personal Active Cycle Volume or First-Line Active Cycle Volume requirement.

A status rate is a qualification parameter used by the reward algorithm. It is not a promised percentage return on a participant's Smart Cycle.

4. Qualification volume, Delta and depth

Several similar-looking values serve different purposes. Keeping them separate makes the Partner Program much easier to understand.

The short version

The original Support Amount and the generated Delta are not the same value. Partner Rewards are calculated from Delta, not from the full amount placed into a Smart Cycle.

Actual and Weighted Partner Structure Volume

• Actual Partner Structure Volume shows the structure's qualifying volume before depth coefficients are applied.
• Weighted Partner Structure Volume shows the volume after the coefficients are applied and is used for status qualification where the rules require it.

Example of weighted volume

Suppose the structure has 1,000 USDT of qualifying volume on each of three depth groups:

This example explains status-volume weighting only. It does not calculate a Partner Reward.

Where to check the numbers

• open Programme Partenaires → Mon équipe for qualification volumes and next-status progress;
• open Statistiques to compare structure activity by depth and period;
• open Historique des cumuls to see an actual calculated Partner Reward;
• use Portefeuille partenaire → Historique des retraits to verify a completed transfer.

Do not use cycle volume, Partner Structure Volume and Delta as interchangeable terms. Cycle volume is used for status qualification; Delta is the reward calculation base.

5. Compression: who receives which part of the reward

Compression distributes the available Partner Reward according to the percentage qualifications of active partners in the branch. An upline participant receives the difference between their status rate and the rate already realised by a qualified partner below.

The rule in three situations

The position of a wallet at the top of a branch does not guarantee a reward. Qualification and active status determine how the available percentage is distributed.

Official example: Builder 4 above Builder 3

The lower structure generates 1,000 USDT of Delta.

Participant	Statut de partenaire	Rate	Calculation	Partner Reward
Lower qualified partner	Constructeur 3	24%	24% × 1,000	240 USDT
Upline partner	Constructeur 4	27%	(27% − 24%) × 1,000	30 USDT
Total distributed by status rates		27%		270 USDT

If there is no Builder 3 between the source and Builder 4

Builder 4 can realise the full eligible rate:

27% × 1,000 USDT = 270 USDT

If the lower partner reaches the same or a higher rate

If the lower partner reaches Builder 4 (27%) or a higher status, the upline Builder 4 no longer has a positive percentage difference. The structure behind that partner is compressed for the upline participant.

Compression does not remove a participant from the Partner Structure. It changes how the Partner Reward is distributed for the relevant Delta source.

6. Partner Rewards from Lockup Flow

For a qualifying Lockup Flow Smart Cycle, the inviter receives a Partner Reward calculated as a percentage of the invited participant's Delta.

When and how it is calculated

1. The invited participant creates a Lockup Flow Smart Cycle.
2. The system records the inviter's Partner Status at that moment.
3. The applicable status and compression rules are applied to the cycle's Delta.
4. The Partner Reward is accrued once when the Smart Cycle is created; the inviter does not wait for the invited participant to Claim.

Automatic transfer rule

• if an accrued Lockup Flow Partner Reward is more than 10 USDT, it is automatically credited to the inviter's wallet after formation;
• an amount below 10 USDT is credited to the Partner Balance;
• when the accumulated Partner Balance reaches 10 USDT, 10 USDT is automatically transferred to the inviter's wallet.

Check the sequence in Accrual History → Partner Wallet → Withdrawal History → Tx Hash.

A Partner Reward accrual and the invited participant's Claim are separate events. The accrual does not mean that the inviter controls or initiates the invited participant's Claim.

7. Partner Rewards and qualification from Daily Flow

For Daily Flow, the inviter's applicable Partner Reward percentage is calculated from the invited participant's Delta. The percentage is determined by the inviter's Partner Status when the invited participant creates the Smart Cycle.

For Flux quotidien, 20% of the Partner Reward is credited when the cycle is created, and the remaining 80% is paid in equal parts over the 200-day cycle. Use Historique des cumuls et Portefeuille partenaire to verify actual accruals and transfers.

How Daily Flow is counted for status qualification

Daily Flow contributes to the structure's qualifying volume with a coefficient of 0.5. Short-term Smart Cycle plans are counted with a coefficient of 1.0.

Formula: qualifying volume = short cycles × 1.0 + Daily Flow × 0.5.

The coefficient affects status qualification volume, not the participant's 1.1% / 1.3% daily assistance calculation and not the Partner Reward percentage itself.

Atlas explains the coefficient as a way to prioritise regular short-cycle activity, prevent one large long-term cycle from disproportionately accelerating status growth, and keep qualification conditions balanced across partner teams.

Hybrid visual: use the official Daily Flow qualification graphics showing 100% short cycles et 50% Daily Flow with the × 0.5 formula.

Daily Flow still contributes to qualification. The coefficient changes how much of its cycle volume is counted; it does not remove Daily Flow from the Partner Program.

8. Matching Reward

Matching Reward is an additional status benefit available from Master 1 onward. It allows a participant to receive the applicable Matching Reward percentage from the Partner Rewards of personally invited leaders.

Qualification condition

Matching Reward is awarded only when the personally invited participant:

• reaches the same Partner Status as the inviter; or
• reaches a higher Partner Status than the inviter.

If the personally invited participant's status is lower, Matching Reward is not awarded from that participant's Partner Rewards.

Matching Reward rates

How to read the rule

Matching Reward is calculated from the Partner Reward received by the personally invited qualified participant. It is not calculated directly from that participant's Support Amount or total structure turnover.

Master 3 inviterpersonally invited→Master 3+Matching active

Master 3 inviterpersonally invited→Master 2Not active

Matching Reward concerns personally invited participants only. The unlimited-depth Structure Reward and the personally invited leader's Matching Reward are different mechanisms.

9. How to verify an accrual and a transfer

Use the dashboard in chronological order. Each screen answers a different question.

Step 1 — find the calculation

Ouvrir Partner Program → Accrual History and check:

• Accrual Date — when the reward was recorded;
• Bonus — which Partner Reward mechanism was applied;
• Accrued Reward Amount — the amount added by the calculation.

An entry in Accrual History confirms an accrual. It does not by itself confirm that USDT has already reached the connected wallet.

Step 2 — check the partner balance

Ouvrir Portefeuille partenaire and compare:

The Partner Wallet balance is an internal dashboard value. It is not the same as the USDT balance displayed by MetaMask.

Step 3 — verify the blockchain transfer

Ouvrir Withdrawal History, find the relevant transfer and select its Tx Hash. BscScan should show:

• transaction status;
• date and time;
• sender and recipient addresses;
• token and amount;
• network fee and block confirmations.

Before comparing addresses, verify that the same wallet is connected in the Atlas dashboard and MetaMask.

If the numbers do not match immediately

1. Check whether a Lockup Flow accrual is still below the automatic-transfer threshold.
2. Check whether the record is an accrual rather than a completed withdrawal.
3. Confirm the connected wallet address and BNB Smart Chain network.
4. Open the Tx Hash instead of relying only on the dashboard total.
5. If no Tx Hash exists, save the wallet address, Smart Cycle ID, date and screenshot before contacting support.

10. My Team and Statistics: managing the structure

My Team — qualification and people

Utiliser Mon équipe when you need to:

• copy the referral link;
• confirm the referrer;
• see the current Partner Status and rate;
• compare Current / Required / Remaining values;
• inspect Structure Lines;
• search for a wallet address;
• identify leaders within the structure.

Statistics — activity and dynamics

Utiliser Statistiques to answer a different set of questions:

• how many new registrations and active partners appeared;
• whether activity came from Lockup Flow or Daily Flow;
• which period changed: Day, Week, Month, Year or All Time;
• where the activity occurred: Entire Structure, First Line, Lines 2–10 or Line 11+;
• which lines are the most active.

Statistics helps explain development of the structure, but it does not replace Accrual History. Activity can exist without producing a Partner Reward for a particular wallet because status, compression and qualification rules still apply.

11. Three worked examples

Example A — Start with no qualified partner between

Calculation: 15% × 100 = 15 USDT.

The result is recorded in Historique des cumuls according to the applicable flow and accrual rules. This example assumes that no other qualification or compression condition changes the percentage.

Example B — Builder 4 above Builder 3

Input	Value
Upline status	Builder 4 — 27%
Lower qualified status	Builder 3 — 24%
Delta	1,000 USDT

• Builder 3: 24% × 1,000 = 240 USDT;
• Builder 4: (27% − 24%) × 1,000 = 30 USDT.

Example C — Matching Reward for a personally invited Master

Assume a participant has Master 1 status with a 5% Matching Reward rate. Their personally invited participant also reaches Master 1 or higher and receives a Partner Reward of 100 USDT.

Calculation: 5% × 100 = 5 USDT Matching Reward.

The 5% is applied to the personally invited leader's Partner Reward, not to their Support Amount and not to their total structure turnover.

Master 1 inviter · 5%→Partner Reward 100→Matching Reward 5

All three examples isolate one rule for learning purposes. Actual dashboard results can combine compression, flow-specific rules, qualification and applicable fees.

12. Why a Partner Reward may be missing

Information to prepare for support

• connected wallet address;
• referrer or participant wallet address, if relevant;
• Smart Cycle ID and flow type;
• approximate date and time;
• screenshot of the relevant dashboard tab;
• Tx Hash, if one exists;
• short description of the expected and displayed result.

Never send a seed phrase, private key or wallet password to support.

13. Final checklist and risk warning

Before sharing the referral link

• the official Atlas dashboard is open;
• the intended wallet is connected on BNB Smart Chain;
• a qualifying Smart Cycle is active;
• Mon lien de parrainage is available;
• the invited participant understands that wallet actions remain under their own control.

Before interpreting a reward

• identify whether it is Structure Reward or Matching Reward;
• identify whether the source is Lockup Flow or Daily Flow;
• use Delta as the reward base, not Support Amount;
• account for status-rate differences and compression;
• separate Actual and Weighted Partner Structure Volume;
• verify accrual, dashboard balance and blockchain transfer as separate stages.

Risk warning

Participation is voluntary. Delta, Partner Rewards and the return of a Support Amount are not guaranteed. Claims depend on sufficient smart-contract liquidity. Status tables, screenshots and numerical examples explain the current mechanics; they are not a promise of income or future results.

Related instructions

• Tableau de bord personnel
• Smart Cycle
• Contrats et BscScan
• Sécurité
• Glossaire
• Dépannage